Philips Air purifier AC3256 / 10
Description
Philips AC3256 / 10 Air Purifier with VitaShield IPS technology naturally removes ultrafine particles as low as 0.02 µm, as well as 99.97% of allergens commonly present in the air efficiently. Aerasense technology gives you peace of mind by displaying real-time indoor air quality.
Indication
Advanced NanoProtect filter offers complete protection
The design of the HEPA NanoProtect filter and extra thick active carbon allows a totally effective purification and reduces the life cycle of the particles present in the air.
Automatic special AL mode effectively removes allergens
The special allergen mode design is very effective in removing common aeroallergens. When the purifier detects even the slightest change in air quality, they will improve their cleaning performance to eliminate allergens in the air.
Excellent purification for rooms up to 95 m2
Vitashield IPS, with aerodynamic design and extra thick NanoProtect HEPA filter provides a superior clean air rate of up to 393 m3 / hr in rooms up to 95 m2. It can effectively remove ultrafine particles as low as 0.02 µm * (a value more than 100 times lower than the PM2.5 index), removes 99.97% of allergens commonly present in the air, 99.9% of bacteria and some viruses, such as H1N1 *. In addition, it offers guaranteed protection against harmful gases such as formaldehyde, toluene and TVOCs.
PM2.5 real-time index and 4-color ICA indicator
The PM2.5 numerical indicator, together with the 4-color ring, provides real-time information on indoor air quality.
HealthyAirProtect alert that accurately calculates filter life
Advanced AeraSense technology accurately calculates filter life based on indoor contamination level, air flow, and operating time. HealthyAirProtect Alert lets you know instantly when it's time to replace the filter. If it is not changed immediately, the appliance stops to avoid operating without any effect, since the filter does not perform its function. This guarantees healthier air at all times.
Ultra-quiet 33dB sleep mode
The unit reduces the fan speed and noise level in silent mode to avoid discomfort at night; Plus, the lights can be turned off whenever you want.
Automatically controls, reacts and purifies air
Capable of being measured with a professional sensor, Philips AeraSense technology is extremely effective in detecting even the slightest changes in indoor air conditions. It continuously monitors the air and automatically adjusts the fan speed when it detects a change in the particles.
ECARF and Airmid certified and tested *
Long-lasting performance
Touch user interface with large numeric display
Large handle for easy portability
Intake mode
It is recommended that you plug the plug of the appliance into the socket.
2 Press to turn on the device.
»By default, the appliance works in automatic mode.
After measuring the quality
from the air for a while
brief, the sensor selects
automatically color
suitable quality pilot
from air.
»After measuring the particles
in the air, the device shows the
PM2.5 level on the screen.
3 Hold down for three
seconds to turn off the device
-
There are no questions for this article yet.
Questions and Answers
Ask a question about this article and you will get reply from a huge Naturlovers community
If you don't see it, check the spam, it may have been marked as spam.